ISO/IEC Identification cards — Recording technique is a set of nine ( to ) standards describing the recording technique on identification cards. Cartes d’identification — Technique d’enregistrement —. Partie 1: Estampage. STANDARD. ISO/IEC. Reference number. ISO/IEC (E). BS ISO/IEC is one of a series of International Standards describing the parameters for identification cards as defined in the terms.
|Published (Last):||4 August 2012|
|PDF File Size:||10.1 Mb|
|ePub File Size:||16.29 Mb|
|Price:||Free* [*Free Regsitration Required]|
Using either system is correct but intermixing or reconverting values can result in errors.
Account Number Name Expiration Date. While the information contained on each track may be only slightly different, the field order, field lengths, and method of field separation and termination differs significantly.
In the early years of Magnetic Stripe technology, data was recorded at lower density to increase read-reliability. ISO Specification – No longer in use. The data is read least significant bit first. Proof sent to secretariat or FDIS ballot initiated: Site Search Upcoming Events. The embossed characters are isi for transfer of data either by use of imprinters or by visual or machine reading.
Character Configuration including parity bit. Recording Density bits per inch.
ISO/IEC – Identification cards — Recording technique — Part 1: Embossing
Monday to Friday – The layout of embossed characters in this area is not intended to interfere with TIM. Other custom utilizations are also possible and appropriate.
In order to encode the additional alpha-numeric information required on the Driver’s License, the specification was revised to permit alpha-numeric information to be encoded on track 3. ISO defines the physical characteristics of the card. Below will be found a brief synopsis of some Magnetic Strip Encoding Standards. It takes into consideration both human and machine aspects and states minimum requirements.
Readers with both track 1 and 2 are recommended for acquiring Credit Card data since redundancy permits the authorization process to compare account information on both tracks isp also fallback to the lower density track data if the reader is unable to decode track 1 due to damaged track data on the card. Track 1 contains the customer’s name in addition to the account number and expiration date recorded at higher density. Failure to conform iao specified criteria is negotiated between the involved parties.
Tracks 1 and 3 read alphanumeric data at bpi, while track 2 reads numeric data only at 75 bpi. This table is only an overview of what data fields are contained on the three tracks of a magnetically coded driver’s license.
Account Number Expiration Date. Track 1 and 2 of the Driver’s License Magnetic Stripe format conform to the original formatting standards used by the Banking and Credit Card industry.
Magnetic Strip Encoding – Abacus 21
Low density data is still recorded on track 2 for compatibility with older-technology readers and provide redundancy when reading with newer-technology readers. Physical Plastic Card 2. The information below is abstracted from these standards.
Life 77811-1 A standard is reviewed every 5 years 00 Preliminary. Lower-density data recorded on track 2 contains only the account number and expiration date. Note also the redundancy:. Call Abacus 21 for further details. The original design was made using the Imperial measurement system. Full copies of these standards can be pruchased from www.
Physical Dimensions of Cards: This document specifies requirements for embossed characters on identification cards.
BS ISO/IEC 7811-1:2018
Check out our FAQs. Final text received or FDIS registered for formal approval. It is the purpose of this document to provide criteria to which cards shall perform. This document is one of a series of International Standards describing the 7181-1 for identification cards as defined in the terms and definitions clause and the use of such cards for international interchange.